Edelbrock 800 cfm Carburetor

Description

The success of the Edelbrock Performer Series carburettors continues to grow.  The Edelbrock carb will bolt on and run straight from the box for dependable street performance and smooth response throughout the power band.  Float levels are set at the factory and there are no failure prone power valves.  You can change mixture settings in seconds and all gaskets are above the fuel level for a leak free operation.  The square bore base fits conventional carb pattern e.g. Holley and the 5 1/8” neck accepts the popular air cleaners.  The Edelbrock 800 carb is designed for maximum street performance small block and big block engines – use with stroker, high horsepower engines and big blocks.  Manual choke, fitted with .113 primary and .101 secondary jets, .071 x .047 metering rods.  Carb height 3 1/4″ (83mm).  For carb studs use EDEL8008.  For calibration kit use EDEL1480.  For adjustable fuel inlet use EDEL8089