Description

The success of the Edelbrock Performer Series carburettors continues to grow.  The Edelbrock carb will bolt on and run straight from the box for dependable street performance and smooth response throughout the power band.  Float levels are set at the factory and there are no failure prone power valves.  You can change mixture settings in seconds and all gaskets are above the fuel level for a leak free operation.  The square bore base fits conventional carb pattern e.g. Holley and the 5 1/8” neck accepts the popular air cleaners.  The Edelbrock 600 carb is designed for good street performance small block and some big block engines – very good choice for 300-350HP small blocks.  Electric choke, fitted with .098 primary and .095 secondary jets, .075 x .047 metering rods.  Carb height 3 1/4″ (83mm).  For carb studs use EDEL8008.  For calibration kit use EDEL1479.  For adjustable fuel inlet use EDEL8089